NOTE:
Always perform the “Basic Inspection” before performing diagnosis in the following table. Refer to Work Flow.
| Symptom | Diagnosis procedure | Reference page | |
|---|---|---|---|
| Manual functions (for specific part) do not operate. | Sliding operation | Check sliding switch. | Component Function Check |
| Reclining operation | Check reclining switch. | Component Function Check | |
| Lifting operation (front) | Check lifting switch (front). | Component Function Check | |
| Lifting operation (rear) | Check lifting switch (rear). | Component Function Check | |
| Tilt operation (if equipped) | Check tilt switch. | Component Function Check | |
| Telescopic sensor (if equipped) | Check telescopic switch. | Component Function Check | |
| Door mirror operation | 1. Changeover switch. | Component Inspection | |
| 2. Mirror switch | Component Inspection | ||
| All parts of seat | Check power seat switch ground circuit. | Diagnosis Procedure | |
| Memory functions (for specific part) do not operate. | Sliding operation | Check sliding sensor. | Component Function Check |
| Reclining operation | Check reclining sensor. | Component Function Check | |
| Lifting operation (front) | Check lifting sensor (front). | Component Function Check | |
| Lifting operation (rear) | Check lifting sensor (rear). | Component Function Check | |
| Tilt operation (if equipped) | Check tilt sensor. | Component Function Check | |
| Telescopic operation (if equipped) | Check telescopic sensor. | Component Function Check | |
| Memory functions and manual functions (for specific part) do not operate. | Sliding operation | Check sliding motor | Component Function Check |
| Reclining operation | Check reclining motor | Component Function Check | |
| Lifting operation (front) | Check lifting motor (front). | Component Function Check | |
| Lifting operation (rear) | Check lifting motor (rear). | Component Function Check | |
| Tilt operation (if equipped) | Check tilt motor. | Component Function Check | |
| Telescopic operation (if equipped) | Check telescopic motor. | Component Function Check | |
| Entry/Exit assist function does not operate. | 1. Check system setting. | Work Procedure | |
| 2. Perform initialization. | Work Procedure | ||
| 3. Check front door switch LH. | Diagnosis Procedure | ||
|
Intelligent Key interlock function does not operate. (Other automatic operations and Intelligent Key system are normal) |
1. Check door lock function. | System Description | |
| 2. Perform memory storing. | Work Procedure | ||
The following symptoms are normal operations, and they do not indicate a malfunction:
| Symptom | Cause | Action to take | Reference page |
|---|---|---|---|
| Entry/exit assist function do not operate. | No initialization has been performed. | Perform initialization. | Work Procedure |
|
Entry/exit assist function is disabled.
Entry/exit assist function is set to ON before delivery (initial setting). |
Change the settings. | Work Procedure | |
| Entry assist function does not operate. | Manual operation with power seat switch was performed after exit assist function execution. | Perform the entry assist function. | System Description |
| Memory function, entry/exit assist function, or Intelligent Key interlock function does not operate. | The operating conditions are not fulfilled. | Fulfill the operation conditions. |
Memory function: System Description |
|
Entry assist function: System Description |
|||
|
Exit assist function: System Description |
|||
|
Intelligent Key interlock function: System Description |
Nissan Pathfinder Info Center
Email: info@nipathfinder.com
Phone: +1 (800) 123-4567
Address: 123 Pathfinder Blvd, Nashville, TN 37214, USA
Working Hours: Mon–Fri, 9:00 AM – 5:00 PM (EST)