DESCRIPTION
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Pathfinder vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Pathfinder vehicles are equipped with many electronic control units, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to How to Use CAN Communication Signal Chart.
DTC DETECTION LOGIC
DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC Detection Condition | |
---|---|---|---|
U2148-87 |
CAN VDC [CAN communication error (brake control unit)] |
Diagnosis condition | Ignition switch ON |
Signal (terminal) | CAN communication signal | ||
Threshold | Transmission error or reception error | ||
Diagnosis delay time | 2 seconds or more |
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
CHECK SELF-DIAG RESULT
CONSULT
Ignition switch ON and wait for 2 seconds or more.
Check “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
CHECK CAN COMMUNICATION
Check CAN communication. Refer to Trouble Diagnosis Flow Chart.
Is DTC “U2148-87” displayed?
YES>>Repair or replace the malfunctioning part.
NO>>Check intermittent incident. Refer to Intermittent Incident.
DESCRIPTION
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Pathfinder vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Pathfinder vehicles are equipped with many electronic control units, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to How to Use CAN Communication Signal Chart.
DTC DETECTION LOGIC
DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC Detection Condition | |
---|---|---|---|
U2148-87 |
Communication lost with VDC [CAN communication error (brake control unit)] |
Diagnosis condition | Ignition switch ON |
Signal (terminal) | CAN communication signal | ||
Threshold | Automatic back door control unit is unable to receive the CAN communications signal from ABS actuator and electric unit (control unit) | ||
Diagnosis delay time | 2 seconds or less |
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
Inhibit automatic back door system all function
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON and wait for 2 seconds or more.
Check “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
CHECK CAN COMMUNICATION
Check CAN communication. Refer to Trouble Diagnosis Flow Chart.
Is DTC “U2148-87” displayed?
YES>>Repair or replace the malfunctioning part.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Nissan Pathfinder Info Center
Email: info@nipathfinder.com
Phone: +1 (800) 123-4567
Address: 123 Pathfinder Blvd, Nashville, TN 37214, USA
Working Hours: Mon–Fri, 9:00 AM – 5:00 PM (EST)