DTC DETECTION LOGIC
DTC |
CONSULT screen terms (Trouble diagnosis contents) | DTC detection condition | |
---|---|---|---|
B1B00-08 |
CAN COMMUNICATION (CAN communication) |
Diagnosis condition | When ignition switch is ON |
Signal (terminal) | CAN communication signal | ||
Threshold | Signal transmission error or reception error | ||
Diagnosis delay time | 1 second or more |
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
Wireless charger unit does not work
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select "Self Diagnostic Result" mode of "Wireless charger".
Check DTC.
Is DTC "B1B00‐08" detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
CONSULT
Ignition switch ON.
Erase DTC.
DTC confirmation procedure again. Refer to DTC Description.
Is DTC "B1B00‐08" detected again?
YES>>Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
NO>>Inspection End.
DTC DETECTION LOGIC
DTC |
CONSULT screen terms (Trouble diagnosis contents) | DTC detection condition | |
---|---|---|---|
B1B02-1D |
Wireless charger unit (Wireless charger unit) |
Diagnosis condition | When ignition switch is ON |
Signal (terminal) |
Ignition power supply voltage (terminal#1) |
||
Threshold | When the input power calculated internally is 35 W or more | ||
Diagnosis delay time | 1 second or more |
POSSIBLE CAUSE
Ignition power supply circuit malfunction.
Wireless charger unit malfunction
FAIL-SAFE
Wireless charger unit does not work
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select "Self Diagnostic Result" mode of "Wireless charger".
Check DTC.
Is DTC "B1B02‐1D" detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
CHECK WIRELESS CHARGER UNIT POWER SUPPLY CIRCUIT
Check wireless charger unit power supply circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace wireless charger unit. Refer to Removal and Installation.
NO>>Repair or replace malfunctioning parts.
DTC DETECTION LOGIC
DTC |
CONSULT screen terms (Trouble diagnosis contents) | DTC detection condition | ||
---|---|---|---|---|
B1B03-49 |
Wireless charger unit (Wireless charger unit) |
1 | Diagnosis condition | When ignition switch is ON |
Signal (terminal) | - | |||
Threshold | Internal malfunction | |||
Diagnosis delay time | 1 second or more | |||
2 | Diagnosis condition | When ignition switch is ON | ||
Signal (terminal) | - | |||
Threshold | Internal malfunction | |||
Diagnosis delay time | 3.2 seconds or more |
POSSIBLE CAUSE
Wireless charger unit malfunction.
FAIL-SAFE
Wireless charger unit does not work
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select "Self Diagnostic Result" mode of "Wireless charger".
Check DTC.
Is DTC "B1B03‐49" detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
CONSULT
Ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to DTC Description.
Is DTC "B1B03-49" detected again?
YES>>Replace wireless charger unit. Refer to Removal and Installation.
NO>>Inspection End.
DTC DETECTION LOGIC
DTC |
CONSULT screen terms (Trouble diagnosis contents) | DTC detection condition | ||
---|---|---|---|---|
B1B05-09 |
Wireless charger unit (Wireless charger unit) |
1 | Diagnosis condition | When ignition switch is ON |
Signal (terminal) | Wireless charger indicator signal | |||
Threshold | Green and Orange LED is not controlled | |||
Diagnosis delay time | At system startup | |||
2 | Diagnosis condition | When ignition switch is ON | ||
Signal (terminal) | Wireless charger indicator signal | |||
Threshold | Green and Orange LED is not controlled | |||
Diagnosis delay time | At system startup |
POSSIBLE CAUSE
Wireless charger indicator circuit open or short
Wireless charger indicator malfunction
Wireless charger unit malfunction
FAIL-SAFE
Wireless charger unit does not work
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select "Self Diagnostic Result" mode of "Wireless charger".
Check DTC.
Is DTC "B1B05‐09" detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
CHECK HARNESS BETWEEN WIRELESS CHARGER UNIT AND WIRELESS CHARGER INDICATOR
CONSULT
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair the harnesses or connectors.
CHECK HARNESS BETWEEN WIRELESS CHARGER UNIT AND WIRELESS CHARGER INDICATOR
Check for continuity between the wireless charger indicator harness connector and wireless charger unit harness connector.
Wireless charger indicator | Wireless charger unit | Continuity | ||
---|---|---|---|---|
Connector | Terminal | Connector | Terminal | |
M135 | 4 | M216 | 5 | Yes |
Is the inspection result normal?
YES>>GO TO 3.
GO TO 3.
NO>>Repair the harnesses or connectors.
Repair the harnesses or connectors.
CHECK WIRELESS CHARGER INDICATOR GROUND CIRCUIT
Check for continuity between the wireless charger indicator harness connector and ground.
Wireless charger indicator | (–) | Continuity | |
---|---|---|---|
Connector | Terminal | ||
M135 | 4 | Ground | No |
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair the harnesses or connectors.
REPLACE WIRELESS CHARGER INDICATOR
Replace wireless charger indicator.
Ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to DTC Description.
Is DTC B1B05-09 detected again?
YES>>Replace wireless charger unit. Refer to Removal and Installation.
NO>>Inspection End.
CHECK FUSE
Check for blown:
Power source | Fuse No. | Capacity |
---|---|---|
Ignition switch ON or START | 4 | 10 A |
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace the blown fuse after repairing the affected circuit.
CHECK IGNITION POWER SUPPLY CIRCUIT
Ignition switch ON.
Check voltage between wireless charger unit harness connector and ground.
(+) | (-) | Standard | Reference value | |
---|---|---|---|---|
Wireless charger unit | ||||
Connector | Terminal | |||
M216 | 1 | Ground | 9.0 - 16.0 V | Battery voltage |
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace wireless charger unit power supply harness.
CHECK GROUND CIRCUIT
Ignition switch OFF.
Disconnect wireless charger unit connector.
Check continuity between wireless charger unit harness connector and ground.
Wireless charger unit | — | Continuity | |
---|---|---|---|
Connector | Terminal | ||
M216 | 4 | Ground | Yes |
Is the inspection result normal?
YES>>Inspection End.
NO>>Repair or replace wireless charger unit ground harness.
Nissan Pathfinder Info Center
Email: info@nipathfinder.com
Phone: +1 (800) 123-4567
Address: 123 Pathfinder Blvd, Nashville, TN 37214, USA
Working Hours: Mon–Fri, 9:00 AM – 5:00 PM (EST)