Nissan Pathfinder: Roof - Power Supply and Ground Circuit

• Moonroof Motor Assembly
• Sunshade Motor Assembly

Moonroof Motor Assembly Nissan Pathfinder 2022

Diagnosis Procedure

CHECK FUSE

1. Ignition switch OFF.

2. Check that the following fuse is not blown (open):

   Fuse No.	Capacity
   31	15 A

Is the fuse blown (open)?

YES>>

Replace the blown fuse after repairing the affected circuit.

NO>>

GO TO 2.

CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY

1. Disconnect moonroof motor assembly connector.

2. Ignition switch ON.

3. Check voltage between moonroof motor assembly harness connector and ground.

   (+)		(–)	Voltage (Approx.)
   Moonroof motor assembly
   Connector	Terminal
   R111	6	Ground	Battery voltage

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness.

CHECK MOONROOF MOTOR ASSEMBLY GROUND CIRCUIT

Check continuity between moonroof motor assembly harness connector and ground.

Moonroof motor assembly		—	Continuity
Connector	Terminal
R111	1	Ground	Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

Sunshade Motor Assembly Nissan Pathfinder 2022

Diagnosis Procedure

CHECK FUSE

1. Ignition switch OFF.

2. Check that the following fuse is not blown (open):

   Fuse No.	Current rating
   46	15 A

Is the fuse blown (open)?

YES>>

Replace the blown fuse after repairing the affected circuit.

NO>>

GO TO 2.

CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY

1. Disconnect sunshade motor assembly connector.

2. Ignition switch ON.

3. Check voltage between sunshade motor assembly harness connector and ground.

   (+)		(–)	Voltage (Approx.)
   Sunshade motor assembly
   Connector	Terminal
   R110	6	Ground	Battery voltage

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness.

CHECK SUNSHADE MOTOR ASSEMBLY GROUND CIRCUIT

Check continuity between sunshade motor assembly harness connector and ground.

Sunshade motor assembly		—	Continuity
Connector	Terminal
R110	1	Ground	Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.