Nissan Pathfinder: Power Control System - Basic Inspection

• Additional Service When Replacing Ipdm E/r
• Configuration (ipdm E/r)

Additional Service When Replacing Ipdm E/r Nissan Pathfinder Fifth generation

Description

After replaced IPDM E/R, it is necessary to perform control unit configuration with CONSULT. For details, refer to Work Procedure.

AFTER REPLACEMENT

When replacing IPDM E/R, write vehicle specification with CONSULT vehicle configuration.

CAUTION:

Never perform vehicle configuration other than performing with new IPDM E/R or the control function may not operate normally.

Work Procedure

REPLACE IPDM E/R

Replace IPDM E/R. Refer to Removal and Installation.

GO TO 2.

WRITING Nissan Pathfinder Vehicle SPECIFICATION

Perform configuration (IPDM E/R). Refer to Description.

Work End.

Configuration (ipdm E/r) Nissan Pathfinder Fifth generation

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the IPDM E/R.

The configuration requires a network connection. CONSULT connects to the network and then it downloads the configuration data from the server. Then CONSULT writes the Nissan Pathfinder vehicle specification to the IPDM E/R.

Refer to Work Procedure.

NOTE:

For network connection and operation details, refer to “CONSULT Operation Manual”.

CAUTION:

• Complete the “Configuration” procedure in order.

• If incorrect “Configuration”, incidents may occur.

• Never perform “Configuration” except for a new IPDM E/R.

Work Procedure

WRITING VEHICLE SPECIFICATION

CONSULT

Perform writing Nissan Pathfinder vehicle specification to the IPDM E/R following "Automatic Configuration" procedure of "Configuration" according to the CONSULT Operation Manual.

NOTE:

• Log in to the network according to CONSULT guidance.

• For network connection and operation details, refer to “CONSULT Operation Manual”.

Work End.

Squeak and Rattle Trouble Diagnoses ++Meter, Warning Lamp & Indicator