Nissan Pathfinder: Mirrors - Passenger Door Mirror Control Module (Ecu Diagnosis Information). Diagnosis and Repair Work Flow (Basic Inspection)
- Passenger Door Mirror Control Module (Ecu Diagnosis Information)
- Diagnosis and Repair Work Flow (Basic Inspection)
Passenger Door Mirror Control Module (Ecu Diagnosis Information) Nissan Pathfinder Fifth generation
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
|
Terminal (Wire color) | Description | Condition |
Value (Approx.) | |||
|---|---|---|---|---|---|---|
| (+) | (−) | Signal name | Input/Output | |||
|
1 (P) |
Ground | Door mirror sensor (passenger side) left/right signal | Input | Door mirror RH position | Change between 6 V (close to left edge) ‐ 0V (close to right edge) | |
|
2 (LG) |
Ground | Door mirror sensor (passenger side) up/down signal | Input | Door mirror RH position | Change between 6 V (close to left edge) ‐ 0V (close to right edge) | |
|
3 (V) |
Ground | Door mirror motor (passenger side) up output signal | Output | Door mirror RH | Other than above | 0 V |
| Operate (up) | Battery voltage | |||||
|
4 (LA/G) |
Ground | Battery power supply | Input | — | Battery voltage | |
|
5 (W) |
Ground | Ground (sensor) | — | — | 0 V | |
|
6 (R) |
Ground | Down mirror motor sensor power supply | Input | — | 4 - 6 V | |
|
7 (V) |
Ground | LIN communication (door mirror) | Input/Output | Ignition switch ON |
|
|
|
8 (GR) |
Ground | Door mirror motor (passenger side) close output signal | Output | Door mirror (passenger side) | Other than above | 0 V |
| Operate (close) | Battery voltage | |||||
|
9 (G) |
Ground | Door mirror motor (passenger side) open output signal | Output | Door mirror (passenger side) | Other than above | 0 V |
| Operate (open) | Battery voltage | |||||
|
10 (LG) |
Ground | Door mirror motor (passenger side) down/right output signal | Output | Door mirror RH | Other than above | 0 V |
| Operate (down/right) | Battery voltage | |||||
|
11 (Y) |
Ground | Door mirror motor (passenger side) left output signal | Output | Door mirror RH | Other than above | 0 V |
| Operate (left) | Battery voltage | |||||
|
12 (B) |
Ground | Ground | — | — | 0 V | |
Diagnosis and Repair Work Flow (Basic Inspection) Nissan Pathfinder 5th Gen
Work Flow
DETAILED FLOW
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred) as much as possible when the customer brings the Nissan Pathfinder vehicle in.
>>
GO TO 2.
REPRODUCE THE MALFUNCTION INFORMATION
Check the malfunction on the Nissan Pathfinder vehicle that the customer describes.
Inspect the relation of the symptoms and the condition when the symptoms occur.
>>
GO TO 3.
IDENTIFY THE MALFUNCTIONING SYSTEM WITH “SYMPTOM DIAGNOSIS”
Use “Symptom diagnosis” from the symptom inspection result in step 3. Then identify where to start performing the diagnosis based on possible causes and symptoms.
>>
GO TO 4.
IDENTIFY MALFUNCTIONING PARTS WITH “COMPONENT DIAGNOSIS”
Perform the diagnosis with “Component diagnosis” of the applicable system.
>>
GO TO 5.
REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
>>
GO TO 6.
FINAL CHECK
Check that malfunctions are not reproduced when obtaining the malfunction information from the customer, referring to the symptom inspection result in step 3.
Are all malfunctions corrected?
YES>>Inspection End.
NO>>GO TO 3.
Nissan Pathfinder (R53) 2022-2026 Service Manual
Passenger Door Mirror Control Module (Ecu Diagnosis Information). Diagnosis and Repair Work Flow (Basic Inspection)
- Passenger Door Mirror Control Module (Ecu Diagnosis Information)
- Diagnosis and Repair Work Flow (Basic Inspection)
Contact Us
Nissan Pathfinder Info Center
Email: info@nipathfinder.com
Phone: +1 (800) 123-4567
Address: 123 Pathfinder Blvd, Nashville, TN 37214, USA
Working Hours: Mon–Fri, 9:00 AM – 5:00 PM (EST)
